How to Install Epson Receipt Printer

The following guide is a step by step procedure on how to install the Epson Receipt printer for use by most front line circ staff.

1. The Epsom printer software can be found on the L: Drive, more specifically, L:\IT Dept\Software
2. Open the Epson TM-88V Driver folder
3. Launch the install software
   1. For staff, this may prompt you for an admin user name and password, use the following:
      • User Name: download
      • Password: Library4ever
4. Click next
5. Accept TOS
6. Choose minimum install bubble
   1. Click next
7. On the next screen click add
   1. Right hand side of the pop up box
8. On the next screen there are multiple drop downs and a Printer name section, click the top drop down
   1. Top drop down is labeled as select driver
   2. Scroll down this list until you find the Epson TM-88V Model, select this printer
   3. The printer name should already prepopulate with the name of the printer
   4. In the port type drop down, select Create a USB port
   5. Check the box that is listed as Set as Default Printer
9. Click next
10. On the next page, you should see the previous box as above in step 7, if you correctly see the printer you just added, select it, and click next
11. On the next pop up, click next
12. Printer installation will commence
13. Once installation is complete, click finish

Once installation is complete, test to make sure that the printer is working by checking out a book using either Polaris or Leap. If the receipt comes out, the printer was installed correctly.

Last Revised July, 05, 2022